Certified fully compliant to ROVER 1st July 2021 specifications single beam header comb transport trailers are manufactured in our workshop in accordance with Vehicle Standards Bulletins (VSB).
Single beam 6000kg trailers have a usable bed length of approximately 12 meters long and 2.5m wide, with a 3.8m drawbar mounted to a turntable dolly.
Constructed from A grade steel plate AS/NZS – 1594 – HA25 and steel grade structural AS/NZS 3679. 1-300, AS1163 C350LO 4,5,6 and 9mm RHS an SHS sections. The floor bed for the comb is 200mm x 100mm x 6mm and 9mm SHS Steel.
Tow coupling can be either a tow ball or tow eye. Fitted with a 50 mm tow eye 10,000kg rated D: 100 KN type tow coupling. The tow coupling is also fitted with two HT rated safety chains.
Axles and Tyres
The trailer has one single axle kit on the front dolly and the rear section has a dual Dexter Torflex Axle kit fitted with 16” land cruiser sunraiser hubs to carry 245-70 R16/R15 10PR tube tyres. Axles rated at 3000kg each Tyres are rated at 1180kg each.
John Deere version of our single beam header comb trailer is built to John Deere’s exacting standards under our exclusive supplier number 0000375740.
We are the only registered John Deere manufacturer in Western Australia.
Built to precise specifications for previous and current models including:
Priced from only $17,800 +gst call us today to place your order.
Protected and built to our specifications under IP Australia Registration No. 202010673. this trailer can not be replicated by other manufacturers so please don’t be fooled by cheap copies.